Our partners Sifam Tinsley offer a complete range of high quality current transformers offering measurment & protection class accuracies.
What is the use of a current transformer?
Current transformers reduce high primary currents to a much lower value and provide a convenient way of safely monitoring the actual electrical current flowing in an AC circuit using a standard ammeter.
When to use a split core current transformer
A Current Transformer with a split core allows you to easily install the CT around the existing bus or cable conductors, thus eliminating the need to disconnect, move, and reconnect the bus or cable, Used in retrofit applications
RJ12 Current Transformer
Single & 3 phase current transformer range is for use with the AP15-3DL, AP35 products
- RJ12 Plug In Connection
- RJ12 Cable Included as standard
- 100mA Secondary
- Simple, Error Free Connection
- Single phase ratios from 50A to 250A
- Aperture Hole Centres (3-phase CTs only), 25mm / 35mm / 45mm
- Three phase ratios from 60A to 630A
Types of Current Transformers Available
- Moulde case current transformers
- Split core current transformers (UL Approved)
- New Split core Miniature range
- Miniature current transformers
- Core balanced current transformers
- Tape wound current transformers
- Resin Cast current transformers
- UL approved current transformers, (Split core & Ansi versions)
- 3 in 1 mould case CT’s (5A secondary)
- 3 in 1 mould case CT’s with RJ12 connection
- Protection CT’s Class, 5P** & 10P** (Class PX on request)
Omega Series Current Transformers
Omega 10 (Split Core)
- Ratio from 100-5000 Amps AC
- Compliant with IEC 61869/60044-1
- Flame retardant grade enclosure (UL 94V-O)
- Test voltage 3kV 50/60Hz 1min.
- System voltage 720V max.
- CT’s manufactured as per IEC 61869/60044-1
- Insulation class: E
Omega 20 (Ring Type)
- Available in 0.2S, 0.2, 0.5S, 0.5, 1, 3 accuracy classes
- Polycarbonate case
- Wide range of sizes
- Various mounting options
- wall mounting, busbar, DIN rail mounting
- Wire sealable terminal covers
XMER (Moulded Case)
- Ratio from 1A to 7500A with 1A or 5A secondaries
- Various mounting options wall mounting, cable mounting, bus bar mounting and DIN rail mounting
- Available in 0.2 & 0.2s accuracy class
- Wire sealable terminal covers
- Compliant with IEC 61869/60044-1
- Protection Class available 5P5, 5P10, 5P20
LTRC Series – Resin Cast
- Ratio from 100A to 1200A with 5A secondary
- Wall mounting fixing
- Case type epoxy Available in 0.2 & 0.2s accuracy class
- Wire sealable terminal covers
- Compliant with IEC 61869/60044-1
- Protection Class available 5P5, 5P10, 5P20
XMER (3 Phase Case)
- Ratio from 60A to 630A with 5A secondary
- Various mounting options wall mounting, cable mounting, bus bar mounting and DIN rail mounting
- Integrated Wire sealable terminal covers
- Compliant with IEC 61869/60044-1
- Cost effective solution
Omega 30 - Ansi
- Ratio from 60A to 630A with 5A secondary
- Various mounting options wall mounting, cable mounting, bus bar mounting and DIN rail mounting
- Standard : ANSI/IEEE C57.13
- Case: 10% glass filled polycarbonate, flame retardant grades classified UL 94V-0.
- Insulation Level: 600 Volts,
- SHT & SFT types terminals are brass studs No. 8-32 with one flat washer, lock washer & regular nut
- All the SHT & SFT models also available as SHL & SFL with leads
For all the SHT types mounting bracket kit when required
XMER Moulded Case CT's
- Measuring, primary wound, and summation CTs
- 33 Different case Model designs, case widths: 45, 50, 62, 74, 86, 100, 104, 130, 140 and 225mm
- Wide range of system current rating, busbar sizes and apertures
- Feet mounting, busbar and DIN rail mounting options
- Accuracy Class 0.2, 0.5, 1 and 3, (0.2S Class on specials request for tariff metering)
- Ratio settings up to 7500 Amps
- 1 and 5Amp secondaries (custom Secondaries possible)
- Sealable terminal covers
- UL approved (pending)
- Applicable Standards IEC 61869, IEC/EN 60044-1
Split Core CT's
- 5 Moulded case sizes with various apertures
- Designed for installation without interrupting the supply.
- Transformers offer Class 0.5 and 1 accuracy
- Transformer ratio ratings from 100/5 to 5000/5.
- Applicable Standards IEC 61869, IEC/EN 60044-1
- Locking Pin
- UL Approved file No E472409
Three Phase Current CT's
- Cost effective moulded case 3 phase measuring current transformers
- Range includes 3 model types with busbar centres 25, 35 & 45mm, equivalent to standard MCCB centres.
- Ratio ratings from 60 to 630 with 5A secondaries
- Comprehensive measurement of class accuracy
- Wire sealable terminal covers
- Feet mounting, busbar and Din rail fixing options
Got Questions?... Our Sales Team are here to answer any questions you may have, Get In Touch Below!
Contact Us
Talk to our team today about your Current Transformer enquiry or let us help choose the correct CT for your industrial application
